Fluid Fill Matic
The Fluid Fill Matic is an affordable, automatic top-up system for your cooling lubricants. Thanks to its low cost, high quality and efficiency, the system from the Netherlands pays for itself quickly. Cooling lubricant is an expensive product, and is also not always used in the right way, causing problems such as smoke and odour development. The Fluid Fill Matic guarantees the constant quality of your cooling lubricant and is therefore ideal for 24/7 operation. Your concentrations automatically stay at the correct level, so that your coolant continues to perform optimally
The Fluid Fill Matic is the answer to the increasing regulatory pressure on components in coolants and the continuous, 24/7 production in the machining. What are the benefits of the Fluid Fill Matic? Thanks to this automatic top-up system you will never have to top up coolant manually again! That offers many benefits in terms of efficiency, productivity and continuity.
Discover how the Fluid Fill Matic works!
This overview shows how each individual component of the Fluid Fill Matic works.
Click on the number for more information.
1. Fluid Fill Stop (FFS)
The Fluid Fill Stop is a secure water supply leading to the Fluid Fill Matic. The Fluid Fill Stop continually measures the water supply. If the set supply is exceeded, it is interrupted. This means that all the pipes are secure and no flooding can occur.
2. Cooling Lubricant Drum
The Fluid Fill Matic in the example is connected to a single drum of coolant.
3. Dosatron Mixing Unit
This mixes the cooling lubricant in the correct ratio with water.
4. Drum Signalling
The drum ifs fitted with a drum signalling unit,which detects when the drum should be replaced
5. Manifold and circular feed
This automatic top-up system is very versatile. You can also connect the Fluid Fill Matic to a circular feed or manifold, which means you can connect one or more machines.
6. Fluid Fill Matic
The Fluid Fill Matic regulates the quantity of cooling lubricant that is added to the reservoir. Thanks to the monitored, secure and automatic supply of coolant you can always be assured of the correct level of coolant in your reservoir, and therefore of the optimal lubrication.
The float constantly gauges the level of the coolant in your reservoir. If the level is lower than the set level, the sensors send the signal ‘top-up’ to the Fluid Fill Matic.
Service and Installation
To make the coolant process even more manageable and to increase quality, you can use the Fluid Fill Matic in combination with a weekly or monthly quality check.
Would you like one of our service technicians to install the Fluid Fill Matic? Then get in touch with the nearest distributor to schedule an appointment.
Install it yourself
You can install the Fluid Fill Matic yourself using our installation video en instructions on the website. You can contact us for advice on the installation of the the pipework, but you are also welcome to use a local installer.